Modified on: Tue, 25 Jun, 2019 at 5:45 PM
Yes, the Honeywell Lyric Controller offers optional RF jam detection for wireless systems which detects a condition that may impede proper RF reception (i.e., jamming or other RF interference). RF jamming occurs when something in our frequency range (345MHz or 2.4ghz) has been transmitting for 20 seconds or longer.
In any Armed/Disarmed state it causes the display to show a triangle with an exclamation point inside and the message 988 (345mhz) or 990 (2.4ghz) RF Jam with a rapid trouble beeping that can be silenced with any key press.
If trouble reporting is enabled a report to Central Monitoring Station (E344 RF Receiver Jam) will be sent. Once the RF Jam condition is gone the Trouble can be cleared with a Disarm + Code entry. Once the trouble is cleared a Restore report will be sent (R344) if Trouble Restore reporting is enabled. Note: The panel can still be Armed if an RF Jam condition exists.
The RJ Jam feature from factory comes activated with a RF Jam Log. To adjust the Lyric controller RF Jam detection settings from the Lyric Controller's home screen select Security > Tools > enter 4 digit installer code "default is 4112" > Program > System Type > Toggle RF Jam button to your liking.
If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact AlarmClub at 1-844-335-5897 for your free consultation! *We are usually able to takeover just about any kind of security system so don’t hesitate.
Alarm Monitoring Services
Honeywell Lyric Controller FAQ’s
Honeywell Lyric Controller Manuals
All Honeywell Lyric Security System Video's Playlist :
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.
Do You Have any Discussion Comments?
comments powered by Disqus