Modified on: Tue, 25 Jun, 2019 at 5:45 PM
To power up a Honeywell Lyric controller it must have the battery plugged in first, then apply Transformer power.
2. CHECK THE DISTANCE OF THE TRANSFORMER WIRE! When wiring the Transformer, the wire should never be further than 20 feet on 18ga wire. When using smaller wire, 20ga wire 13 feet, and 22ga wire 8 feet.
3. Check the polarity of the transformer. It is a DC transformer.
4. After power up the home screen will be displayed during its boot up sequence and with “System Standby…” at the top for 2 minutes.
5. The Wi-Fi enrollment screen will be displayed upon boot-up for a defaulted Controller or a Controller that has not been associated with AlarmNet 360. Select, “Scan Access Points” to find available broadcasting networks. Select the Network to join.
If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact AlarmClub at 1-844-335-5897 for your free consultation! *We are usually able to takeover just about any kind of security system so don’t hesitate.
Alarm Monitoring Services
Honeywell Lyric Controller FAQ’s
Honeywell Lyric Controller Manuals
All Honeywell Lyric Security System Video's Playlist :
Did you find it helpful?Send feedback
Do You Have any Discussion Comments?
comments powered by Disqus