Modified on: Tue, 25 Jun, 2019 at 5:45 PM
How to program a Honeywell 5816 general response into a window using the Honeywell LYNX Touch L5210 wireless security system using a general response setting. Remove the Honeywell 5816 from its packaging box, remove the front cover by depressing the tab on the contact, write down the 7 digit serial number, insert the battery, seal the cover back up.
To program: From the home screen select security, more, tools, installer code "default code is 4112", program, zones, highlight first available zone or add new, select serial number, input the serial number, loop number is 2, assign zone description, device type is window, response type is general response, report yes, select chime type, supervision supervised, save, back, yes, exit to the home screen.
General response setting is assigned to contacts on windows, and asset protection within the area. This setting is used to track activity of the occupant and alert an occupant of the activity of others. Reports are not sent to the central station and or to the event history log. When this type of sensor is activated it will announce a unique chime type. Two beeps followed by activity detected and zone descriptor. This will continue for 15 seconds until there is an acknowledgement from either the panel of by disarming from a key fob. The fault will restore itself once the zone has restored itself.
The Honeywell 5816 window contact is a two zone wireless transmitter with both built-in magnetic reed switches and wired closed circuit contact loop. It Features a standard white plastic case “a brown case is available in packs of three and included is a supervised replaceable battery.
The Honeywell 5816 contacts are one of the larger contacts that Honeywell develops aesthetically but, for overall usage the 5816 contact is a great addition to your wireless security system. The Honeywell 5816 has a large antenna, which gives you a better connection back to the Honeywell L5210 system.
For the lowest No-Term alarm monitoring rates contact GEOARM Security 1-877-443-6276.
Honeywell LYNX Touch L5210 Frequently Asked Quesitons "FAQ's"
Alarm Monitoring: http://bit.ly/geoarmmonitoring
Geoarm Security Blog: http://bit.ly/DIYSECURITYBLOG
Honeywell L5210: http://bit.ly/LYNXL5210
Did you find it helpful?Send feedback
Do You Have any Discussion Comments?
comments powered by Disqus